Switch, On/Off
|
|
|
On/Off circuit breaker switch.
***NOTE*** This switch can come with 2 or 3 prongs. The third prong is only a ground. Therefore, the two or three prong will be interchangeable and can be used in place of one another. If you have the three prong and receives the two, you simply need to attach the ground to the machine. ** |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | Screw | 36 | 2 | #10 X 3/4" FLAT HD SCRW | 4 | 2A | Screw | 4 | 2B | Screw | 4 | 3 | Screw | 4 | 4 | Screw | 2 | 5 | Screw | 4 | 6 | Screw | 1 | 7 | Screw | 4 | 8 | Screw | 3 | 9 | Screw | 4 | 10 | Nut | 3 | 11 | Washer, Locking | 4 | 12 | Washer, Locking | 4 | 13 | Washer | 2 | 14 | Spacer | 4 | 15 | Screw, Self Drilling | 5 | 16 | Screw | 3 | 17 | Screw | 3 | 18 | Screw | 11 | 19 | Screw | 2 | 20 | Screw | 2 | 21 | Screw | 2 | 22 | Screw | 2 | 23 | Screw | 1 | 24 | Screw | 1 | 25 | Screw | 1 | 26 | Screw | 1 | 27 | Screw | 2 | 28 | Screw | 7 | 29 | Screw | 1 | 30 | Screw | 8 | 31 | Screw | 2 | 32 | Screw | 4 | 33 | Washer | 2 | 34 | Washer, Lock | 2 | 35 | Nut, Nylock | 4 | 36 | Nut | 4 | 37 | Tinnerman Clip | 3 | 38 | Retainer | 2 | 39 | Decal, Deck Rail | 2 | 40 | Rail, Foot, Left | 1 | 41 | Decal,Warning | 1 | 42 | NLA Spring, Deck | 2 | 43 | Belt guide | 2 | 44 | Deck | 1 | 45 | Endcap, Internal, Rectangle | 2 | 46 | Spacer, Frame | 2 | 47 | Magnet | 1 | 48 | Roller, Front | 1 | 49 | Treadbelt | 1 | 50 | Wire Harness | 1 | 51 | NLA Latch, storage | 1 | 52 | Wire Harness | 1 | 53 | #8 X 1" SCREW | 4 | 53B | Screw | 4 | 54 | Rail, Foot, Right | 1 | 56 | NLA Bracket, Roller, Rear | 2 | 57 | Wire harness | 1 | 58 | Foot, Rear, Right | 1 | 59 | Foot, Rear, Left | 1 | 60 | Roller, Rear | 1 | 61 | Tool, Belt Adjustment | 1 | 62 | Cover, Motor | 1 | 63 | Hood Accent | 1 | 65 | WIRE,JMPR,008",G/Y,R/RF01731CB | 1 | 66 | Belt, Drive, Flexonic | 1 | 67 | Motor, Drive | 1 | 68 | Wire, Green | 1 | 69 | Power Cord | 1 | 70 | Grommet, Strain Relief | 1 | 71 | Switch, On/Off | 1 | 72 | Controller | 1 | 73 | RPM sensor | 1 | 74 | Retainer Clamp | 1 | 74A | Retainer Clamp | 1 | 74B | Clamp, Wire | 1 | 75 | Cover, Lower, Front | 1 | 76 | Wire tie | 3 | 77 | Cable Tie | 8 | 78 | Clamp, Cable, Long | 2 | 79 | Wire Tie | 4 | 80 | Cover, Upright, Left | 1 | 81 | Endcap, Lower Handlebar | 2 | 82 | LEFT HANDRAIL | 1 | 83 | Handlebar, Right | 1 | 84 | LEFT UPRIGHT | 1 | 85 | RIGHT UPRIGHT | 1 | 86 | Cover, Upright, Right | 1 | 87 | NLA Wire harness, Upright, 75" | 1 | 88 | NLA Spacer, Upright, Left | 1 | 89 | Endcap, Base | 2 | 90 | Bumper, Leveler | 4 | 91 | NLA Spacer, Upright, Right | 1 | 92 | Decal, Caution, English | 2 | 93 | NLA Wire harness, 10" | 1 | 94 | Spacer | 2 | 95 | BASE | 1 | 96 | Wheel, Transport | 2 | 97 | Motor, Incline | 1 | 98 | Spacer | 1 | 99 | Safety Key | 1 | 100 | Cable Tie, Mounting | 3 | 101 | NLA CONSOLE | 1 | 102 | CONSOLE FRAME | 1 | 103 | NLA Tray, Left | 1 | 104 | NLA Cupholder, Right | 1 | 105 | Clamp, Console | 2 | 106 | Base, Console | 1 | 107 | NLA Bar,cross | 1 | 107A | NLA Bar,cross | 1 | 107B | Fix kit, Crossbar | 1 | 108 | Door, Access | 1 | 109 | Wire Harness | 1 | 110 | Wire Harness | 1 | | 12" RED WIRE, M/F | 1 | | WIRE,JMPR,010",Black,M/F 114011B | 1 | | Wire, Jumper, Blue | 1 | | Wire harness, Jumper | 1 | | Tool, Adjustment, Belt | 1 | | Sensor, Incline, Kit | 1 | | Washer, Flat | 4 | | CNSL RE-PROGRAMMING CARD | 1 | | TECH SHEET | 1 | | Envelope | 1 | | Decal, Warning, Surge, French | 1 | | CNSL WRNG DECAL, FCA | 1 | | USER'S MANUAL,ENG | 1 | | USER'S MANUAL,FCA | 1 | | LITPAC, NOTE: | 1 | | HARDWARE KIT, NOTE | 1 | | Accessory Kit | 1 | | Accessory Kit, Canada | 1 | | Lubricant, Treadbelt | 1 | | Kit, Lube | 1 | | IFIT Card, Weight Loss, L1, French | 1 | | I-Fit Card, Weight Loss | 1 | | Card, IFIT, Circuit training, Level one | 1 | | IFIT Card, Circuit Training, L2 | 1 | | IFIT Card, Circuit Training, L3 | 1 | | Card, JM Boot camp, Level 4 | 1 | | NLA Card, Workout. Level 1 | 1 | | NLA Card, Get Fit, Level 2 | 1 | | NLA Card, Program, Jillian Michaels, Level 3 | 1 | | NLA Card, Weight loss, Level 1 | 1 | | NLA Card, Weight loss, Level 2 | 1 | | NLA Card, Weight loss, Level 3 | 1 | | Card, JM Power Walking, Lvl 1 | 1 | | Card, JM Power Walking, Lvl 2 | 1 | | Card, Ifit, Jillian Michaels | 1 | | Accessory Kit | 1 | | 4 TUBE LUBE KIT, FCA | 1 | | Decal, Warning, Latch | 1 | | Screw | 4 | | Power Cord | 1 | | Retainer Clamp | 1 | | Clamp, Wire | 1 | | Decal, Caution | 2 | | NLA Bar,cross | 1 | | Fix kit, Crossbar | 1 | | 24" LIFT MOTOR WIRE | 1 | | TECH SHEET | 1 | | Decal, Ground Warning | 1 | | Decal, Warning, Static, IFIT | 1 | | Manual, Users | 1 | | MANUAL, NTL61009.0,FCA | 1 | | LITPAC, NOTE: | 1 | | HARDWARE KIT, NOTE: | 1 | | Washer, Star | 1 | | USER'S MANUAL, NTL61009.2 | 1 | | LITPAC, NOTE: | 1 | | CN,TURN OFF DEMO,ECA/FCA | 1 | | CN,TURN OFF DEMO,ECA/FCA | 1 | | CNSL RE-PROGRAMMING CARD | 1 | | USER'S MANUAL, ENGLISH | 1 | | USER'S MANUAL, FRENCH | 1 | | LITPAC, NOTE: | 1 | | USER'S MANUAL, NTL61009.1 | 1 | | LITPAC, NOTE: | 1 | | CNSL RE-PROGRAMMING CARD | 1 | | LITPAC, NOTE: | 1 | | NLA Crossbar | 1 | | LITPAC, NOTE: | 1 | | LITPAC, NOTE | 1 | |
|
