Switch, On/Off
|
|
|
On/Off circuit breaker switch.
***NOTE*** This switch can come with 2 or 3 prongs. The third prong is only a ground. Therefore, the two or three prong will be interchangeable and can be used in place of one another. If you have the three prong and receives the two, you simply need to attach the ground to the machine. ** |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | Screw | 46 | 1A | Screw | 48 | 2 | Screw | 4 | 3 | Screw | 4 | 4 | 5/16" X 2 3/4" BOLT | 4 | 5 | Screw | 4 | 6 | Screw | 2 | 7 | Nut | 2 | 8 | Washer, Locking | 10 | 9 | Washer | 8 | 10 | Bumper, Leveler | 4 | 11 | Spacer | 4 | 12 | WHEEL | 2 | 13 | Screw | 8 | 14 | Wrench, Allen | 1 | 15 | Wrench, Allen | 1 | 16 | Screw | 4 | 17 | Screw | 8 | 18 | Screw | 9 | 19 | Screw | 12 | 20 | Screw | 1 | 21 | Screw | 2 | 22 | Screw | 2 | 23 | Screw | 2 | 24 | Screw | 2 | 25 | Screw | 1 | 26 | Screw | 8 | 27 | Screw | 1 | 28 | Bolt | 4 | 29 | Screw | 2 | 30 | Washer, Lock | 2 | 31 | Washer, Star | 4 | 32 | Nut, Nylock | 4 | 33 | Nut, Hex | 4 | 34 | 3/8" X 5" PATCH BOLT | 4 | 35 | Tinnerman Clip | 15 | 36 | Fastener | 2 | 37 | Plate, Incline | 1 | 38 | NLA Cover, Roller | 2 | 39 | RIGHT ROLLER COVER | 1 | 40 | Belt, Drive, Flexonic | 1 | 41 | Magnet | 1 | 42 | Roller, Drive | 1 | 43 | Belt guide | 2 | 44 | Deck, Treadmill | 1 | 45 | LEFT PLATFORM DECAL | 1 | 47 | Roller, Idler | 1 | 48 | Treadbelt | 1 | 49 | NLA Cover, Front | 1 | 50 | Power cord | 1 | 51 | Grommet, Strain Relief | 1 | 52 | BELLY PAN COVER | 1 | 53 | Switch, On/Off | 1 | 54 | BELLY PAN | 1 | 55 | RPM sensor | 1 | 56 | Retainer Clamp | 1 | 57 | Isolator, Rear, Left | 1 | 58 | Magnet | 1 | 59 | BELLY PAN PLATE | 1 | 60 | Isolator, Front, Left | 1 | 61 | NLA Endcap, Front | 1 | 62 | Isolator, Front, Right | 1 | 63 | TOP INCLINE MOTOR COVER | 1 | 64 | Motor, Incline | 1 | 65 | BOTTOM INCLINE MOTOR CVR | 1 | 66 | Wire Harness, Incline Motor | 1 | 67 | Cable Tie, Mounting | 5 | 68 | Isolator, Rear, Right | 1 | 69 | Resistor | 1 | 70 | ELECTRONICS PLATE | 1 | 71 | NLA Controller | 1 | 72 | Wire tie | 8 | 73 | Wire Tie | 3 | 74 | Cable Tie | 2 | 75 | NLA Motor, Drive | 1 | 76 | Cover, Hand Rail | 2 | 77 | LEFT UPRIGHT | 1 | 78 | Wire harness, Console | 1 | 79 | NLA PLATE,INCLN STOP,PNTD | 1 | 80 | BASE | 1 | 81 | Grommet | 2 | 82 | Decal, Caution, English | 2 | 82A | Decal, Caution, English | 2 | 82B | Decal, Caution | 2 | 83 | Decal, Warning, Latch, Horizontal | 1 | 83A | Decal, Warning, Latch, Horizontal | 1 | 83B | Decal, Warning, Latch, French | 1 | 84 | Endcap, Rectanglar, Internal | 2 | 85 | Console, Display | 1 | 86 | LEFT PULSE HANDRAIL | 1 | 87 | Cover, Console | 1 | 88 | HANDRAIL | 2 | 89 | Back, Console | 1 | 90 | LEFT PULSE WIRE | 1 | 91 | RIGHT PULSE WIRE | 1 | 92 | Plate, Sensor, Pulse | 4 | 93 | Insert, Pulse, Housing | 4 | 94 | Grip, HR | 2 | 95 | Wire Harness | 1 | 96 | CONSOLE FAN | 1 | 97 | Wire Harness | 2 | 98 | Cap, Handrail | 2 | 99 | NLA Cupholder, Left | 1 | 100 | NLA Cupholder, Right | 1 | 101 | NLA INCLINE SENSOR WIRE | 1 | 102 | RIGHT PULSE HANDRAIL | 1 | 102A | RIGHT PULSE HANDRAIL | 1 | 102B | Safety Key | 1 | 103 | CONSOLE CROSSBAR | 1 | 104 | Bushing | 8 | 105 | Safety Key | 4 | 106 | Grommet | 2 | 107 | Washer | 2 | 108 | Plate, Console | 1 | 109 | Endcap, Round, Internal | 2 | 110 | HANDRAIL | 1 | 111 | HANDRAIL GRIP | 2 | 112 | Clamp, Console | 2 | | Washer | 2 | | WIRE,JMPR,008",White,M/F 114011B | 1 | | Wire, Jumper, Blue | 1 | | Wire Harness, Jumper, Blue 4" | 1 | | Wire, M/F, 8" | 1 | | 10 inch RED WIRE - M/F | 1 | | 10" BROWN WIRE, F/F | 2 | | Wire, Static Filter | 1 | | RUBBER DECK WASHER | 4 | | Spacer, Console Insert | 3 | | FIXKIT, DECK SQUEAK | 1 | | RE-PROGRAMMING MODULE | 1 | | NLA TECH SHEET | 1 | | Envelope | 1 | | Decal, Ground Warning | 1 | | USER'S MANUAL, NTL15909.0 | 1 | | MANUAL, FCA, NTL15909.0 | 1 | | LITPAC, NOTE: | 1 | | HARDWARE KIT, NOTE: | 1 | | Accessory Kit | 1 | | Accessory Kit, Canada | 1 | | Lubricant, Treadbelt | 1 | | Kit, Lube | 1 | | NLA Accessory Kit, IFIT WIFI | 1 | | Screw | 12 | | Shim, Frame | 1 | | Shim, Frame | 1 | | RE-PROGRAMMING MODULE | 1 | | NLA TECH SHEET | 1 | | Manual, Owner's | 1 | | LITPAC, NOTE: | 1 | | HARDWARE KIT, NOTE: | 1 | | Accessory Kit | 1 | | Wifi Module | 1 | | Cable Tie 23" | 4 | | USER'S MANUAL, NTL15909.3 | 1 | | LITPAC, NOTE: | 1 | | HARDWARE KIT, NOTE: | 1 | | USER'S MANUAL | 1 | | LITPAC, NOTE: | 1 | | Screw | 2 | | USER'S MANUAL | 1 | | LITPAC, NOTE: | 1 | | LITPAC, NOTE: | 1 | | Screw | 48 | | WIRE,JMPR,006",BLU,F/F 109407E | 1 | | Manual, Owner's | 1 | | LITPAC, NOTE: | 1 | | NLA Mat, Floor | 1 | | RIGHT PULSE HANDRAIL | 1 | | LITPAC, NOTE: | 1 | | WIRE,JMPR,012",BLU,M/F 114011B | 1 | | Wire, White, 4" | 1 | | Wire Harness, Power Supply | 1 | | Clamp, Cable, Long | 1 | | Screw | 4 | | Screw | 4 | | TECH SHEET | 1 | | Manual, Users | 1 | | Hardware Kit | 1 | | LITPAC, NOTE: | 1 | | NLA Accessory Kit, IFIT WIFI | 1 | | Module,Card, SD, I Fit | 1 | |
|
