Motor, Incline
Out of Stock - Extended Back Order. (Explain) |
|
Incline motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM Qty | 1 | Screw | 8 | 2 | M4 X 25MM SCREW | 4 | 3 | NLA Screw | 2 | 4 | Screw | 2 | 5A | Nut, Nylock | 4 | 5B | Retainer, Pin | 1 | 6 | SCREW,SBHS,GR8,BPO,3/8-16X1.7P | 2 | 7 | Screw | 4 | 8 | Washer, Locking | 4 | 9 | Washer | 4 | 10 | Screw, Self Drilling | 5 | 11 | Nut | 2 | 12 | Screw | 20 | 13 | Cap, Small | 2 | 14 | M8 X 35MM SCREW | 2 | 15 | Screw | 2 | 16 | Screw | 2 | 17 | Screw | 1 | 18 | Screw | 1 | 19 | Screw | 2 | 20 | Screw | 1 | 21 | Handlebar, Left | 1 | 22 | Screw | 8 | 23 | Screw | 2 | 24 | Bolt | 2 | 25 | Pin | 1 | 26 | Screw | 2 | 27 | Screw | 4 | 28 | Screw | 2 | 29 | Screw | 8 | 30 | Washer, Lock | 2 | 31 | Washer, Flat | 2 | 32 | Washer, Star | 1 | 33 | Washer | 1 | 34 | Screw | 4 | 35 | Nut, Motor | 2 | 36 | Nut, Locking | 4 | 37 | Hex Nut | 4 | 38 | Tinnerman Clip | 3 | 39 | CAGE NUT | 4 | 40 | Wrench, Allen | 1 | 41 | Tool, Wrench | 1 | 42 | Wrench, Allen | 1 | 43 | Tool, Belt Adjustment | 1 | 44 | Decal,Warning | 1 | 45 | Spring, Deck | 2 | 46 | Guide, Belt | 2 | 47 | End Cap, Rectangle, Internal | 2 | 48 | Magnet | 1 | 49 | Belt, Drive | 1 | 50 | Treadbelt | 1 | 51 | NLA Deck | 1 | 52 | Roller, Drive | 1 | 53 | LATCH CAP | 1 | 54 | NLA Latch, storage | 1 | 56 | Rail, Deck, Right | 1 | 58 | NLA Bracket, Roller, Rear | 2 | 59 | NLA Foot, Rear, Right | 1 | 60 | Spacer | 2 | 61 | NLA Roller, Rear | 1 | 62 | NLA Foot, Left | 1 | 63 | Cover, Motor | 1 | 64 | NLA Motor, Drive | 1 | 65 | Wire tie | 3 | 66 | Frame, Lift | 1 | 67 | Wheel, FLAT,.39X1.5X.5" 141173A | 2 | 68 | PLATE,INCLN,1.19X1.05" 162344C | 1 | 69 | RPM sensor | 1 | 70 | Retainer Clamp | 1 | 71 | Wire, Jumper, Black | 1 | 72 | Motor, Incline | 1 | 73 | Spacer | 1 | 74 | Controller | 1 | 75 | Power Cord | 1 | 76 | Grommet, Strain Relief | 1 | 77 | Switch, On/Off | 1 | 78 | BLYPN,MOLDED,URBGY | 1 | 79 | UPRT,LT,STLGS | 1 | 80 | UPRT,RT,STLGS | 1 | 81 | Grip, Hand | 2 | 82 | NLA Arm | 2 | 83 | Rail, Deck, Left | 1 | 84 | UPRIGHT INSERT | 2 | 85 | Cover, Hub, Resistance | 2 | 86 | NLA Plug, Endcap | 2 | 87 | Insert, Arm | 2 | 88 | Knob, Resistance | 2 | 89 | LEFT UPRIGHT SPACER | 1 | 90 | Spacer, Upright, Right | 1 | 91 | Endcap, Base | 2 | 92 | WIRE HARNESS | 1 | 93 | Bumper, Leveler | 4 | 94 | Spacer | 2 | 95 | Wheel | 2 | 96 | Wire, Jumper | 1 | 97 | Decal, Caution, English | 2 | 98 | Spacer | 4 | 99 | UPRT,BASE,ARPS | 1 | 100 | HB,1 BEND,ARPS,RT | 1 | 101 | Screw | 13 | 102 | Endcap, Round, Internal | 4 | 103 | Base, Console | 1 | 104 | Holder, Book | 1 | 105 | Grill, Fan | 1 | 106 | Housing, Fan | 1 | 107 | Cable Tie, Mounting | 1 | 108 | NLA Console, Display | 1 | 109 | Safety Key | 1 | 110 | Clamp, Cable, Long | 4 | 111 | Wire Tie | 4 | 112 | Bracket, Motor | 1 | 113 | Cable Tie | 6 | 114 | WIRE,JMPR,008",GRN,F/R | 1 | 115 | Decal, Foot Rail | 2 | 116 | Wire harness, 20" | 1 | | Nut, Nylock | 4 | | Retainer, Pin | 1 | | WIRE,JMPR,010",BLU,M/F 114011D | 1 | | Wire, Blue | 1 | | Wire Harness, Jumper, Black | 1 | | Wire, Jumper, Red | 1 | | Sensor, Incline, Kit | 1 | | LIT,24824,TECHSHT | 1 | | Envelope | 1 | | USER'S MANUAL,ENG | 1 | | LITPAC: NOTE | 1 | | HARDWARE KIT, NOTE | 1 | | Accessory Kit | 1 | | Lubricant, Treadbelt | 1 | | Kit, Lube | 1 | |
|