Switch, On/Off
|
|
|
On/Off circuit breaker switch.
***NOTE*** This switch can come with 2 or 3 prongs. The third prong is only a ground. Therefore, the two or three prong will be interchangeable and can be used in place of one another. If you have the three prong and receives the two, you simply need to attach the ground to the machine. ** |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM Qty | 1 | Screw | 48 | 2 | Screw | 1 | 3 | Washer, Locking | 1 | 4 | Washer | 1 | 5 | Nut, Nylock | 1 | 6 | Screw | 1 | 7 | Screw | 1 | 8 | Screw | 2 | 9 | Screw | 5 | 10 | Screw | 4 | 11 | Screw | 2 | 12 | Screw | 1 | 13 | Pulley | 1 | 14 | NLA Axle, Crank | 1 | 15 | Screw, Self Drilling | 6 | 16 | Screw | 1 | 17 | Screw | 1 | 18 | Washer | 2 | 19 | Screw | 6 | 20 | Screw | 1 | 21 | Screw | 1 | 22 | Screw | 1 | 23 | Bolt, Motor | 1 | 24 | Screw | 1 | 25 | Screw | 2 | 26 | Screw, Adjuster | 2 | 27 | Screw | 2 | 28 | Screw | 4 | 29 | Screw | 2 | 30 | PIN,CLEVIS,.375X1.800" 215942E | 2 | 31 | Pin, Locking | 2 | 32 | Washer, Lock | 2 | 33 | Washer, Flat | 1 | 34 | Nylock Hex Nut | 2 | 35 | Nut, U | 2 | 36 | Hex Nut | 1 | 37 | Tinnerman Clip | 1 | 38 | Nut | 1 | 39 | Nylock Hex Nut | 1 | 40 | Retainer, Pin | 1 | 41 | Screw | 1 | 42 | Isolator, Ajustment, Assembly | 1 | 43 | Decal,Warning | 1 | 44 | Stop, Cushion | 2 | 45 | Bar, Adjustable | 2 | 46 | Belt guide | 1 | 47 | Spring, Deck, Front | 1 | 48 | Spacer | 1 | 49 | NLA Magnet | 1 | 50 | Deck | 2 | 51 | Roller, Front | 2 | 52 | RAIL,DECK,ARPS,RT | 2 | 53 | Wire, Jumper, Black | 2 | 54 | Retainer, Small | 2 | 55 | Treadbelt | 2 | 56 | BKT,RR RLR,ARPS,L/R | 2 | 57 | NLA RIGHT FOOT | 6 | 58 | Roller, Rear | 2 | 59 | LEFT FOOT | 2 | 60 | Tool, Belt Adjustment | 4 | 61 | Belt, Drive, FLEXONIC | 4 | 62 | Motor, Drive | 2 | 63 | HOOD,FRONT,ARPS | 2 | 64 | NLA Clamp, Sensor | 4 | 65 | RPM sensor | 4 | 66 | FRAME,LIFT,ARPS | 19 | 67 | Wire, Jumper | 3 | 68 | NLA Wire harness, 10" | 4 | 69 | Motor, Incline | 8 | 70 | Controller | 2 | 71 | Switch, On/Off | 2 | 72 | Cover, Motor, Lower | 1 | 73 | Power Cord | 2 | 74 | Grommet, Strain Relief | 2 | 75 | Cable Tie | 4 | 76 | Wire Tie | 2 | 77 | Spacer, Handrail | 4 | 78 | Endcap, Round, Internal | 2 | 79 | WIRE HARNESS | 11 | 80 | NLA Latch, storage | 4 | 81 | Tinnerman Clip | 6 | 82 | Screw | 5 | 83 | RAIL,DECK,ARPS,LT | 1 | 84 | WIRE,JMPR,006",GRN,F/F | 1 | 85 | UPRT,BASE,ARPS | 1 | 86 | Endcap, Base, Front, Left / Right | 2 | 87 | Spacer | 6 | 88 | Bumper, Leveler | 6 | 89 | LATCH BRACKET | 1 | 90 | EXTENSION LEG | 2 | 91 | Decal, Caution, English | 2 | 92 | Wheel | 2 | 93 | LEFT ACCESSORY TRAY | 1 | 94 | RIGHT ACCESSORY TRAY | 1 | 95 | Console, Display | 1 | 96 | SPEAKER COVER | 1 | 97 | CONSOLE BACK | 1 | 98 | Wire Harness | 2 | 100 | CONSOLE SPEAKER | 2 | 101 | Cable Tie, Mounting | 2 | 103 | Screw | 4 | 104 | Fan | 1 | 105 | PULSE CROSSBAR | 1 | 106 | LEFT HANDRAIL | 1 | 107 | HB,1 BEND RT,ARPS | 1 | 108 | Endcap, Round, Internal | 2 | 109 | NLA Safety Key | 1 | 110 | Wire Harness | 1 | 111 | LEFT UPRIGHT | 1 | 112 | Upright, Right | 1 | 114 | Wire tie | 4 | 115 | IFIT CARD KIT | 1 | 116 | Tool, Adjustment, Belt | 1 | 117 | Belt Adjustment Tool | 1 | 118 | Clamp, Console, Rubber | 2 | 119 | Wire, Green | 1 | | Tool, Allen wrench | 1 | | Retaining Ring | 2 | | Cable Tie | 1 | | Screw | 1 | | Screw | 2 | | Grease, packet | 1 | | Tool, Belt Adjustment | 1 | | Screw | 2 | | Tool, Wrench | 1 | | Nut | 1 | | Accessory kit | 1 | | Screw | 4 | | NLA Bracket, Pillow Block | 1 | | Washer, Wave | 1 | | Wire tie | 1 | | Screw | 7 | | NLA Axle, Eddy | 1 | | Washer, Flat | 1 | | Washer, Wave | 2 | | NLA IFIT CARD, WELLNESS ,L1 | 1 | | IFIT CARD, WELLNESS ,L2 | 1 | | IFIT CARD, WELLNESS ,L3 | 1 | | NLA IFIT card, Weight Loss Level 1 | 1 | | IFIT CARD, WEIGHT LOSS,L2 | 1 | | NLA Card, I-FIT | 1 | | NLA IFIT SD DEMO KIT | 1 | | Bracket, Link arm | 2 | | Disc, Resistance | 1 | | Decal, Warning | 1 | | BATCVR,3.859X12.295",PAVANO | 1 | |
|